Last updated
17 questions with answers
Ethics, in the context of professional practice, is best defined as:
- A.The study of morality: right and wrong conduct
- B.The laws a legislature passes to govern conduct
- C.A list of technical standards an engineer must follow
- D.The personal opinions of a company's senior management
Show the answer and explanation
Correct answer: AThe study of morality: right and wrong conduct
Why A is right
Ethics studies right and wrong conduct: what people owe one another, what is fair, and how competing obligations should be weighed. It is a branch of philosophy that supplies the reasoning behind rules, so it is broader than any law, technical standard or company policy. Laws often grow out of a society's shared ethics, but not every ethical duty becomes law, and legal conduct is not automatically ethical. That is why the definition centres on right and wrong conduct and the principles that guide it.
Why the other options are wrong
- BOption B: Laws, with the penalties for breaking them, are a separate system; much unethical conduct is not illegal, so law is not the same as ethics.
- COption C: Technical standards describe acceptable engineering methods, not the study of right and wrong conduct.
- DOption D: Ethics is not whatever management prefers; a company's own opinions can themselves be ethical or unethical.
Key principle: Ethics is the study of morality, right and wrong conduct, and exists independently of law or company policy.
In Canada, a professional engineer's or geoscientist's Code of Ethics derives its legal authority from:
- A.The negligence rulings made by Canadian courts
- B.The liability insurance policy each member holds
- C.The Act of a provincial or territorial legislature
- D.The employment contract between member and employer
Show the answer and explanation
Correct answer: CThe Act of a provincial or territorial legislature
Why C is right
A regulator's Code of Ethics binds members because the provincial or territorial engineering or geoscience Act requires every licensed member to follow it. That statutory link is what makes a breach a matter for discipline, up to suspension or loss of licence. Each province and territory writes and enforces its own Code under its own Act, so the wording differs slightly, but the source of authority is the same everywhere.
Why the other options are wrong
- AOption A: Negligence law decides whether a member must pay damages to someone harmed; it is not where the Code's authority comes from.
- BOption B: An insurance policy covers claims against the member and has no power to set or enforce ethical duties.
- DOption D: An employment contract binds the member to one employer, but the Code applies to every licensed member, employed or not.
Key principle: A Code of Ethics gets its legal authority from provincial or territorial engineering or geoscience legislation, not from company policy or voluntary agreement.
A client asks a structural engineer to certify a seismic retrofit of an old masonry building. She has never trained in seismic work, and has not done anything like it in years. The client is in a hurry, and points out that her licence lets her take the job. What is the most appropriate action?
- A.Ask the client to sign a waiver, then take the job
- B.Decline, or bring in a colleague with seismic expertise
- C.Take the job, and finish quickly to meet the deadline
- D.Take the job, since her licence lets her practise in any field
Show the answer and explanation
Correct answer: BDecline, or bring in a colleague with seismic expertise
A tries to contract around the duty. A waiver does not make the work competent, or safe.
C lets the client set the standard. Speed is never a reason to practise outside competence.
D is the trap. Her licence makes her legally eligible, but the code still limits her to work she is competent in.
B is right. She declines, or takes it on only with a qualified colleague reviewing the work.
- A: A waiver cannot lower her duty.
- B: Competence first: decline, or bring in an expert.
- C: The deadline does not set the standard.
- D: A licence is not competence in every specialty.
An engineer on a project abroad is told that a small payment to a local official will speed up routine permit processing. The site manager says everyone does it. What is the most appropriate response?
- A.Refuse, because it is a bribe under Canadian law
- B.Have a local agent pay it, so the firm stays clear
- C.Pay it, and record it as a processing fee
- D.Pay it, since small payments for routine processing are allowed
Show the answer and explanation
Correct answer: ARefuse, because it is a bribe under Canadian law
B just hides the same payment behind someone else.
C disguises a bribe in the books, which makes it worse, not better.
D is the trap. That exception was removed in Canada, in 2017.
A is right. A facilitation payment to a foreign official is a bribery offence, however small, and however common.
- A: A facilitation payment is a bribe.
- B: Hiding it does not change what it is.
- C: Mislabelling it makes it worse.
- D: No longer allowed in Canada, since 2017.
A cheaper haul road would run close to a rural school, adding dust and truck traffic for years. A geoscientist recommends the costlier route, reasoning that the children must never be treated as a mere cost to save money, whatever the savings. Which kind of reasoning is this?
- A.Utilitarianism, weighing total costs and benefits
- B.Duty ethics, people as ends in themselves
- C.Rights ethics, protecting basic rights
- D.Virtue ethics, a balanced middle path
Show the answer and explanation
Correct answer: BDuty ethics, people as ends in themselves
A would weigh the savings against the harm, and could go either way. She refuses to weigh it at all.
C is close, which is why it tempts. But her reason is the duty not to use people as a means, not a list of rights.
D looks for a middle path. She rejects any trade off at all.
B is right. Never treating people as a mere means, whatever the payoff, is duty ethics.
- A: She refuses to weigh lives against savings.
- B: Never a mere means: duty ethics.
- C: Close, but her reason is a duty.
- D: No middle path here.
An engineer notices that a colleague has described a past project in a way that slightly overstates his role. No one is at risk, and it has not been raised with him. What is the most appropriate first step?
- A.Say nothing, since no one is at risk
- B.File a complaint with the regulator right away
- C.Speak to the colleague privately about it
- D.Tell the client the colleague exaggerates
Show the answer and explanation
Correct answer: CSpeak to the colleague privately about it
A ignores an integrity issue. Minor is not the same as none.
B is the trap. It jumps to the most formal step, for a minor matter, before a simple conversation.
D goes around him, and damages his reputation, without giving him a chance to fix it.
C is right. No danger, a minor lapse, so the least formal step comes first. A private word.
- A: Minor is not the same as nothing.
- B: Too formal, too soon, for a minor lapse.
- C: Least formal step first.
- D: Goes around him, unfairly.
An engineer sits on a three person panel scoring bids for a contract. One bidder is owned by the engineer's spouse. The engineer plans to score it strictly on merit, and trusts the other two members to catch any bias. What is the most appropriate action?
- A.Ask the spouse to withdraw the bid quietly before scoring
- B.Disclose only if the spouse's firm wins
- C.Stay on, and score the bid strictly on its merits
- D.Disclose the interest, and step back from that decision
Show the answer and explanation
Correct answer: DDisclose the interest, and step back from that decision
A uses inside influence to make the problem vanish, and still hides it.
B discloses too late. Disclosure comes before the decision, not after.
C is the trap. Good intentions are not disclosure. The interest is still hidden.
D is right. Disclose before any decision, and step aside from scoring that bid.
- A: Still hidden, and unfair to the bidder.
- B: Disclosure comes before, not after.
- C: Good intentions do not replace disclosure.
- D: Disclose, then recuse.
A civil engineer recommends a higher grade of corrosion resistant fastener for a coastal footbridge. The project manager chooses a standard fastener to save money. It meets the code minimum, but will need inspecting and replacing sooner. What is the most appropriate action?
- A.Record the advice in writing, and get it acknowledged
- B.Go along with it silently, since the manager makes the call
- C.Report the project manager to the regulator
- D.Refuse to continue until the higher grade is used
Show the answer and explanation
Correct answer: ARecord the advice in writing, and get it acknowledged
B stays silent. Without a record, the consequences of the decision are never on paper.
C reports a lawful cost decision as if it were misconduct.
D is the trap. The choice is legal and meets code. Refusing outright goes further than the situation calls for.
A is right. Put the advice and the shorter service life in writing, and get the manager to acknowledge it.
- A: Write it down. Get it acknowledged.
- B: Silence leaves no record.
- C: A lawful decision is not misconduct.
- D: Legal and within code: refusing is too far.
A geoscientist finishes a confidential assessment showing strong mineral potential on a property her client wants to buy. At dinner, she tells her sibling the results look very promising, with no specifics. The sibling buys shares before the deal is public. Which view of her conduct is most appropriate?
- A.Acceptable, since she shared no specifics
- B.Acceptable, since the property was in a public filing
- C.Unethical, because she discussed the results at all
- D.Unethical only because her sibling made money
Show the answer and explanation
Correct answer: CUnethical, because she discussed the results at all
A is the trap. Any hint of confidential results is a disclosure, details or not.
B confuses the property, which was public, with her results, which were not.
D judges by the outcome. The breach was the disclosure, whatever happened next.
C is right. Discussing confidential results at all, even informally, breached her duty.
- A: A hint is still a disclosure.
- B: The results were not public.
- C: Discussing them at all was the breach.
- D: The breach was the disclosure itself.
An engineer secretly uses his employer's design software at night for his own private clients. Which term best describes the problem?
- A.Moonlighting, a conflict of interest
- B.Duty to warn, a safety obligation
- C.Fiduciary duty, a duty of loyalty
- D.Natural justice, a fair hearing rule
Show the answer and explanation
Correct answer: AMoonlighting, a conflict of interest
C is close, which is why it tempts. But the named problem is hidden side work using the employer's resources.
A is right. Hidden side work, using the employer's equipment, is a clear conflict.
- A: Hidden side work: a conflict.
- B: About warning of danger.
- C: Close, but not the named problem.
- D: About fair process.
Each of the following is a recognized category of conflict of interest, except which one?
- A.Influence peddling through one's position
- B.Accepting secret commissions
- C.Secret moonlighting for a competitor
- D.Disclosed side work that does not compete
Show the answer and explanation
Correct answer: DDisclosed side work that does not compete
A is a real category. Using your position to push a cause or a group is a conflict.
B is a real category too.
C is also a real category. Undisclosed side work for a competitor.
D is the odd one out. Side work becomes a conflict when it competes with the employer, uses its resources, or is hidden. Disclosed work that does not compete is not a conflict.
- A: True: a real category.
- B: True: a real category.
- C: True: a real category.
- D: False: disclosed, non competing work is no conflict.
A geotechnical firm hired only to design temporary shoring notices that an underpinning detail in the structural engineer's drawings looks undersized. The underpinning protects a neighbouring building, and is outside the firm's contract. What is the most appropriate action?
- A.Report the structural engineer to the regulator at once
- B.Redesign the underpinning themselves, and send it to the contractor
- C.Say nothing, since it is outside their contract
- D.Raise it with the structural engineer of record
Show the answer and explanation
Correct answer: DRaise it with the structural engineer of record
A skips the first rung. The engineer of record has not had a chance to answer yet.
B bypasses the engineer of record, and takes on someone else's design.
C protects no one. A safety concern is never out of scope.
D is right. It protects the public, acts early, and uses the proper first channel.
- A: Skips the first rung.
- B: Bypasses the engineer of record.
- C: Scope never outranks safety.
- D: Public first, early, proper channel.
A materials engineer finds several concrete test results just below the specified strength. Her supervisor asks her to average in results from a stronger, unrelated batch. What is the most appropriate action?
- A.Average them in, since the combined mean will pass
- B.Report them as tested, and raise the shortfall
- C.Retest the concrete until the numbers pass
- D.Leave the low results out of the final report
Show the answer and explanation
Correct answer: BReport them as tested, and raise the shortfall
A is the trap. Blending in unrelated data misrepresents the real strength.
B is right. Report exactly what was tested, and get the concrete properly assessed.
- A: That is falsifying the results.
- B: Report as tested. Raise it.
- C: Fishing for a pass.
- D: Hiding it is dishonest.
During a slow period, a software engineer is asked to help build ad targeting for online gambling. It is legal, and breaks no code, but it troubles her. What is the most appropriate first step?
- A.Take it on, and quietly do poor work
- B.Resign immediately, rather than take it on
- C.Refuse outright, and report the employer
- D.Ask for another assignment, and say why
Show the answer and explanation
Correct answer: DAsk for another assignment, and say why
C is the trap. Nothing illegal or unethical is happening.
D is right. Raise the concern honestly, and ask about an alternative first.
- A: Poor work on purpose is unprofessional.
- B: Far too far, too soon.
- C: Nothing here to report.
- D: Ask honestly, first.
Rushing a proposal, a project manager tells a junior engineer to adapt several paragraphs from a competitor's public brochure. What is the most appropriate action?
- A.Copy them, and change a few words
- B.Copy them, and credit the competitor in a footnote
- C.Adapt them, since the brochure is public
- D.Write original text, or ask for more time
Show the answer and explanation
Correct answer: DWrite original text, or ask for more time
C is the trap. Public is not the same as free to copy.
D is right. Write her own descriptions, even if shorter, or ask for more time.
- A: Still copying.
- B: Still their text.
- C: Public is not free to copy.
- D: Original work, or more time.
An engineer is asked to quote on finishing a project from drawings another firm prepared, and marked confidential. What should the engineer do first?
- A.Use the drawings, since the client provided them
- B.Get a release from the other firm for this use
- C.Refuse the work outright
- D.Alter the drawings slightly, and use them
Show the answer and explanation
Correct answer: BGet a release from the other firm for this use
A is the trap. The other firm's confidential work stays theirs.
B is right. Obtain a release from the firm that prepared them.
- A: Still the other firm's work.
- B: Get a release first.
- C: Further than needed.
- D: Still their work.
An engineer abroad is pressed by his own employer to approve invoices that disguise costly remedial work as ordinary labour, to avoid scrutiny from the funding government. What is the most appropriate action?
- A.Approve them, since his own employer insists on it
- B.Refuse to approve invoices that misstate the work
- C.Keep private notes, and approve them as asked
- D.Approve them, since local practice may allow it
Show the answer and explanation
Correct answer: BRefuse to approve invoices that misstate the work
A is the trap. Loyalty never covers misrepresentation.
B is right. He will not certify something he knows is false.
- A: Loyalty never covers misrepresentation.
- B: He will not certify a falsehood.
- C: Still certifies it.
- D: Custom never excuses dishonesty.
Where these questions come from
Most are worked through on camera in our free NPPE master class; the rest are from our free sample set. The words they lean on are explained in the NPPE glossary. A free account adds 60 practice questions and a timed mini exam, and Basic opens the full bank and the 110 question simulator.
Free accountNo card needed
60 practice questions and a timed mini exam, free
- 60 questions weighted like the real exam
- An 82 minute mini exam, scored by section
- Section I of the study guide in full
- Basic: over 1,400 questions and full mock exams with no limit