Skip to content

P.Eng vs PE

P.Eng vs PE: Canadian and US engineering licences

The P.Eng is Canada’s professional engineering licence, issued by the regulator of each province or territory. The PE is the US licence, issued by each state’s licensing board. Both ask for an accredited degree, about four years of experience and exams, but the exams are different: US candidates write the FE and PE exams from NCEES, while P.Eng applicants outside Quebec write the NPPE on law, ethics and professional practice. A US licence does not transfer to Canada on its own, so a PE who moves north still writes the NPPE.
Issued by a province or territory
P.Eng
Issued by a province or territory
Issued by a US state board
PE
Issued by a US state board
Required for a P.Eng outside Quebec
NPPE
Required for a P.Eng outside Quebec
ABET and Engineers Canada in the Washington Accord
1989
ABET and Engineers Canada in the Washington Accord

Last updated

P.Eng and PE side by side

P.Eng (Canada) compared with PE (United States)
P.Eng (Canada)PE (United States)
Who issues itThe engineering regulator of the province or territory where you practise, such as PEO in Ontario, APEGA in Alberta or Engineers and Geoscientists BCThe licensing board of the state or territory; NCEES members are 68 engineering and surveying licensing boards
DegreeA CEAB accredited engineering degree, or another degree the regulator accepts after an academic assessmentGenerally a bachelor’s degree from an EAC/ABET accredited program
Technical examsNone for CEAB graduates; others may be assigned technical or confirmatory examsThe Fundamentals of Engineering (FE) exam, then the Principles and Practice of Engineering (PE) exam, both from NCEES
ExperienceAssessed through a competency based assessment: at least two years after the degree in Ontario (three to four on average), 48 months in Alberta, four years in BCFour years of acceptable, progressive, verifiable experience in most states
Law and ethicsThe NPPE: 110 multiple choice questions in 2.5 hours, used by every engineering regulator outside QuebecRules beyond the FE and PE exams vary; NCEES tells candidates to check the board where they plan to practise

Sources: NCEES, licensure, PEO, application requirements, APEGA, professional member, Engineers and Geoscientists BC, P.Eng, the NPPE program’s list of regulators. Checked on October 30, 2026.

From a US PE to a P.Eng

ABET in the United States and Engineers Canada have both signed the Washington Accord since it began in 1989, so their accredited degrees are recognized as substantially equivalent. The Accord covers education only: each Canadian regulator decides who it licenses. Engineers Canada has negotiated mutual recognition agreements with the Texas and Nevada boards, but it notes that only a provincial or territorial regulator can decide whether to ratify one. Sources: Engineers Canada, the Washington Accord, Engineers Canada, international mobility.

What a US PE does to get a P.Eng
RegulatorWhat a US PE does
PEO (Ontario)Apply as a new applicant: PEO does not accept licence transfers from the USA. A US degree is not CEAB accredited, so PEO normally assigns technical exams, but since 1 November 2026 a four year bachelor’s degree from a US program recognized under the Washington Accord, awarded in or after the year the USA became a signatory, may be exempted from them once PEO verifies it. No WES report is needed for a US degree. Then the CBA with at least two years of experience after the degree, the NPPE before you apply, and good character. No Canadian experience is required.
APEGA (Alberta)APEGA’s Board of Examiners reviews a degree that is not CEAB accredited and may assign technical exams or university courses. Then 48 months of experience and 22 competencies, and the NPPE: APEGA says all professional membership applicants must pass it, and that a professional practice exam other than the NPPE passed with another Canadian regulator does not count.
Engineers and Geoscientists BCA US State Board PE can send an NCEES Record instead of transcripts. A degree accredited by a Washington Accord signatory such as ABET generally needs no academic exams. Then four years of experience assessed by competencies, including eight Canadian environment competencies that can be gained in Canada or abroad, plus the NPPE and the Professional Practice Online Seminar.

Sources: PEO, application process FAQ, PEO, NPPE, APEGA, technical exams, APEGA, NPPE, Engineers and Geoscientists BC, P.Eng. Checked on October 30, 2026.

Other provinces

Every engineering regulator outside Quebec uses the NPPE. For the rules in each province, see the NPPE by province and engineers moving to Canada.

Going the other way: a P.Eng who wants a PE

APEGA says the PE exam is not required to practise in Canada only. APEGA members and members in training who want a US licence can write it through APEGA ($75 plus GST to APEGA and $400 US to NCEES), and must apply to APEGA before registering with NCEES. Source: APEGA, PE exam.

Where the NPPE fits for a PE

For an engineer licensed in the US, the NPPE is the part of the P.Eng with no equivalent in the NCEES exams. It covers six blueprint sections:

  • Professionalism: the role of professionals in society and the scope of engineering practice in Canada
  • Ethics: ethical theories and the codes of ethics of engineers and geoscientists in Canada
  • Professional practice: standards and codes, risk and quality management, document authentication and the duty to inform
  • Law for professional practice: the Canadian legal system, contract and tort law, business law, intellectual property and dispute resolution
  • Professional law: the acts, regulations and bylaws of the provincial and territorial regulators, and admission to the professions
  • Regulation and discipline: discipline procedures, practice review and continuing professional development

PassNPPE is built for this exam: a study guide for every blueprint sub-topic, practice questions with every option explained, and full timed mock exams. Start with the free sample questions, the NPPE syllabus or how to pass the NPPE.

Free accountNo card needed

60 practice questions and a timed mini exam, free

  • 60 questions weighted like the real exam
  • An 82 minute mini exam, scored by section
  • Section I of the study guide in full
  • Basic: over 1,400 questions and full mock exams with no limit

Frequently asked questions

Is a P.Eng the same as a PE?
They do the same job in two countries. A P.Eng is a licence from a Canadian provincial or territorial regulator; a PE is a licence from a US state or territorial board. Neither one transfers automatically to the other country.
Can a US PE transfer their licence to Ontario?
No. PEO states that it does not accept licence transfers from the USA. A PE applies for a P.Eng like any other applicant: academic assessment, experience through the competency based assessment, the NPPE and good character.See how to get your P.Eng.
Does a US PE have to write the NPPE?
Yes, in Ontario, Alberta and BC. PEO requires the NPPE before you submit your application, APEGA says all professional membership applicants must pass it, and Engineers and Geoscientists BC lists it as a legal and ethical requirement for every P.Eng applicant.See what the NPPE is.
Is the NPPE like the FE or PE exam?
No. The FE and PE exams test engineering knowledge. The NPPE tests professionalism, ethics, professional practice, Canadian law and the regulation of the profession: 110 multiple choice questions in 2.5 hours, with a scaled pass score of 65.See the NPPE exam format.
Do I need a WES report with a US engineering degree?
Not in Ontario: PEO asks for a WES course by course report only from graduates with degrees from outside Canada and the USA. Engineers and Geoscientists BC lets a US State Board PE send an NCEES Record instead of transcripts.