Last updated
Watch the short version
Engineers Moving to Canada: Your P.Eng Licence, Step by Step · 4 min
The six steps, in order
- 1Pick a provinceIts regulator licenses you
- 2WES course by courseFor licensing, not the ECA
- 3Degree reviewExams if gaps are found
- 4EIT and CBALog your experience
- 5Pass the NPPEOIQ exam in Quebec
- 6P.Eng licenceApply when all is met
- Choose the province or territory where you will work. Its regulator issues your licence, and its rules are the ones that apply to you.
- Order the right WES report: the course by course report for licensing, sent to your regulator.
- Apply and get your academic assessment. An accredited degree from a Washington Accord country satisfies the educational requirement; other degrees may be assigned confirmatory or technical exams.
- Register as an engineer in training (EIT) where your regulator offers it, and start recording your experience in the competency based assessment (CBA). Ontario closed its EIT program to new applicants in 2023, and since 1 July 2026 you can start the CBA before you have the full years.
- Pass the NPPE, the exam on Canadian professional practice, ethics and law. In Quebec you write the OIQ professional exam instead.
- Apply for your P.Eng once your experience is validated and every requirement in your decision letter is met.
While you complete these steps, you can practise engineering only if a licensed engineer assumes responsibility for the work, and only licence holders can use the engineer title (source: Engineers Canada).
WES: the immigration report is not the licensing report
Your Express Entry ECA is usually not enough
WES says the Educational Credential Assessment made for immigration (IRCC) leaves out the admission requirement of your earlier credential and the length of your program, which licensing bodies typically need. A course by course report lists every course with its credits and converted grade. For licensing, most engineering regulators ask for the WES ICAP course by course report.
- Already have an ECA? WES lets you upgrade it to a course by course report; choose licensing as the purpose.
- Not yet ordered? Order the course by course report and select your regulator as the recipient. New Brunswick and PEGNL, for example, want the report sent directly from WES.
- WES verifies that your documents are authentic and compares the length and level of your program with the Canadian system. It does not assess the content of your program; your regulator does that in its own academic assessment.
Sources: WES, upgrading your ECA; Engineers and Geoscientists New Brunswick FAQ; APEGS, academic assessment.
Province by province: what each regulator asks for
What each engineering regulator wants for a degree earned outside Canada, and which professional practice exam it uses. Checked on each regulator's own website on October 17, 2026; rules change, so confirm with your regulator before you pay for anything.
| Province or territory | Regulator | Degree from outside Canada | Exam |
|---|---|---|---|
| Ontario | PEO | WES ICAP course by course report for degrees from outside Canada and the US | NPPE |
| Alberta | APEGA | WES ICAP course by course report; WES is the only service APEGA accepts | NPPE |
| British Columbia | Engineers and Geoscientists BC | EGBC does its own academic review and does not accept third party evaluations; transcripts held by WES can count as official | NPPE |
| Saskatchewan | APEGS | WES ICAP course by course report; the WES Gateway Program is accepted if you cannot get your documents because of forced displacement | NPPE |
| Manitoba | Engineers Geoscientists Manitoba | WES: document by document for an accredited engineering degree from a Washington Accord country; course by course for any other engineering degree | NPPE |
| Quebec | Ordre des ingénieurs du Québec (OIQ) | Washington Accord graduates send transcripts; others send a WES ICAP course by course report and course descriptions | OIQ professional exam, plus French |
| New Brunswick | Engineers and Geoscientists New Brunswick | WES course by course report for licensing; the immigration report is not enough | NPPE |
| Nova Scotia | Engineers Nova Scotia | WES ICAP or another accepted method to authenticate documents; this does not replace the Engineers Nova Scotia assessment | NPPE |
| Prince Edward Island | Engineers PEI | WES ICAP course by course; an earlier WES report must be upgraded | NPPE |
| Newfoundland and Labrador | PEGNL | WES course by course report sent directly from WES | NPPE |
| Yukon | Engineers Yukon | Ask Engineers Yukon which documents it needs | NPPE |
| Northwest Territories and Nunavut | NAPEG | Applications processed by APEGA | NPPE |
Sources: PEO, APEGA, EGBC, APEGS, Engineers Geoscientists Manitoba, OIQ, New Brunswick, Engineers Nova Scotia, Engineers PEI, PEGNL, Engineers Yukon, NAPEG; exams: the NPPE program's list of regulators.
Technical exams: what you may have to write
If your degree is not accredited in Canada (by the CEAB) or under the Washington Accord, the regulator may assign technical exams after your academic assessment. Regulators use the Engineers Canada examination syllabi as a guideline to assess academic qualifications. The syllabi come in three groups:
- Basic studies: foundational math and science topics, common to most disciplines.
- Discipline-specific studies: Group A covers the core areas of knowledge and Group B selected advanced areas, for disciplines such as civil, chemical or electrical engineering.
- Complementary studies: safety, economics, sustainability and engineering management.
Depending on how close your degree is to the Canadian standard, you may be given:
- A confirmatory exam program, which confirms the knowledge your degree is believed to give you.
- An exam program that addresses gaps in your academic background, which can include basic studies, discipline and complementary studies exams.
Ontario: Washington Accord degrees may skip the exams
Ontario: two strong exams can waive the rest
What can reduce or replace the exams
- Experience: once the academic requirements are met, Engineers Nova Scotia applicants with ten or more years of experience may have exams reduced or waived.
- The Fundamentals of Engineering (FE) exam, run by NCEES in the United States: APEGA and Engineers PEI may assign it, on its own or with other technical exams, to confirm your technical engineering knowledge. Engineers PEI says not to write it before you receive its decision.
- A bridging program: Toronto Metropolitan University’s IEEQB, run in collaboration with PEO, lets you complete university courses equivalent to the three confirmatory technical exams and the engineering economics exam, plus two complementary courses.
- An accredited degree from a Washington Accord country, which Engineers Canada says satisfies the educational requirement for licensure in Canada.
Technical exams are not the NPPE
Sources: Engineers Canada, PEO application FAQ, TMU IEEQB, APEGA, FE exam, Engineers PEI, FE exam, Engineers Nova Scotia, Engineers Canada FAQ.
Experience: Canadian experience rules have changed
PEO states that all engineering regulators across Canada use a competency based assessment (CBA) to assess readiness for licensure: you describe your work against a set of competencies, and validators confirm it.
- Ontario: the 12 month Canadian experience rule was removed in 2023 (O. Reg. 332/23), and PEO states that it does not require Canadian experience. Since 1 July 2026 you need to pass the CBA and have at least two years of experience after your degree; PEO says applicants need three to four years on average to show every competency.
- Alberta: from 18 July 2026, APEGA uses a revised CBA in which 8 of the 22 competencies are mandatory Canadian work environment competencies, removing the need for one year of Canadian work experience.
- British Columbia: experience gained outside Canada must be shown to be equivalent to working in a Canadian environment.
- Other provinces: check the current rule with your regulator.
Sources: PEO, O. Reg. 332/23, APEGA, EGBC.
Ontario tip: apply within six months of landing
PEO's Financial Credit Program encourages international engineering graduates to apply for a P.Eng licence within six months of landing in Canada. Since May 2019 the fees are no longer waived up front: the application fee you paid is credited towards your registration and initial P.Eng fees once you are licensed. The program also used to credit a first year Engineering Intern (EIT) fee, but PEO closed the EIT program to new applicants in 2023 and lists the Financial Credit Program among the programs its May 2023 licensing changes affected, so check its current terms before you rely on the credit.
Sources: PEO, Financial Credit Program changes; PEO, licensing changes.
Bridging programs for internationally educated engineers
Bridging programs help internationally educated engineers meet academic requirements, prepare for the CBA and NPPE, and enter the Canadian job market. Examples:
- Ontario: Toronto Metropolitan University's Internationally Educated Engineers Qualification Bridging (IEEQB), run in collaboration with PEO, to meet the academic requirements for licensure in Ontario.
- Ontario: University of Toronto's Licensing International Engineers into the Profession (LIEP) certificates.
- Ontario: ACCES Employment's Engineering Connections, for the Canadian labour market, and the OSPE Engineering Licensure Readiness Program, with CBA and NPPE preparation.
- Nova Scotia: ISANS's Internationally Educated Engineers and Architects bridging program.
Ask your regulator and local settlement agency what runs in your province.
Quebec works differently
- French: command of French is required under the Charter of the French Language (section 35). You show it through three years of French-language secondary or post-secondary education, the Quebec secondary French exam or diploma, or the exam of the Office québécois de la langue française.
- The Professional Admission Program has three parts, theoretical, practical and language, to complete within five years.
- The theoretical part ends with the OIQ's own professional exam, not the NPPE.
- Graduates from France can use the mutual recognition arrangement between France and Quebec.
Sources: OIQ, international graduates, OIQ, language requirements.
The NPPE: the exam every newcomer outside Quebec writes
The NPPE is used by every engineering regulator outside Quebec (source: NPPE program). It tests Canadian professional practice, ethics and law, including contracts, liability, the regulators and discipline.
PassNPPE is built for exactly this exam: a study guide that explains each topic in plain English, practice questions with every option explained, and a timed simulator at the real length. Start with the free sample questions or the study guide.
Before you land: a checklist
- Order the WES course by course report for licensing and name your regulator, if your regulator asks for one.
- Collect official transcripts and, for Quebec, course descriptions from your university.
- Keep a record of your engineering work: projects, dates, your role, and who supervised you. The CBA needs real examples and people who can validate them.
- Check your regulator’s language requirement, and French if you are heading to Quebec.
- Plan your NPPE: it runs five times a year on fixed dates.
Immigration itself (Express Entry, provincial nominee programs and work permits) is handled by the federal government and is separate from your engineering licence. Engineers Canada keeps an information hub for newcomers.
Free accountNo card needed
60 practice questions and a timed mini exam, free
- 60 questions weighted like the real exam
- An 82 minute mini exam, scored by section
- Section I of the study guide in full
- Basic: over 1,400 questions and full mock exams with no limit