Skip to content

P.Eng licence

How to get your P.Eng in Ontario and Alberta

A P.Eng licence comes from the engineering regulator of the province where you practise: Professional Engineers Ontario (PEO) in Ontario and APEGA in Alberta. Both ask for the same four things: an engineering degree that meets their academic standard, engineering experience shown through a competency based assessment, a pass on the NPPE, and good character. The details, the order and the fees differ, and both regulators changed their experience rules in 2026.
Or one the regulator recognizes
CEAB degree
Or one the regulator recognizes
How both regulators assess your experience
CBA
How both regulators assess your experience
Required in Ontario and Alberta
NPPE
Required in Ontario and Alberta
Checked before licensing
Good character
Checked before licensing

Last updated

The four requirements

Your road to a P.Eng
  1. 1DegreeCEAB, or recognized
  2. 2ExperienceShown in the CBA
  3. 3NPPELaw and ethics exam
  4. 4Good characterThen your licence

PEO notes that all engineering regulators across Canada now use a competency based assessment (CBA) to judge readiness for licensure, and the NPPE is used by every engineering regulator outside Quebec. Sources: PEO, application requirements, the NPPE program’s list of regulators.

Ontario: Professional Engineers Ontario (PEO)

P.Eng requirements in Ontario
RequirementWhat PEO asks for
DegreeA bachelor’s degree in a CEAB accredited engineering program, or a degree on PEO’s Recognized Programs List plus a technical exam program. Degrees from outside Canada and the USA need a WES course by course report.
ExperiencePass the CBA (34 competencies in seven categories) and have at least two years of eligible, verifiable experience, counted from the date your four year engineering degree is conferred. PEO says applicants need three to four years on average. No Canadian experience is required.
NPPEComplete it before you submit your application. You can write it as soon as you are ready, even right after graduation, and register through PEO’s application portal.
Good characterA good character assessment in the PEO portal, plus government ID.

What changed on July 1, 2026

  • The two year minimum now starts when your degree is conferred, so co-op and internships before graduation do not count toward it, although they can still support your CBA.
  • Eligible experience during a master’s or doctoral program can count toward both the two years and the CBA; there is no credit simply for holding a graduate degree.
  • You can start documenting your CBA in the portal before you have the two years.

Sources: PEO, application requirements, PEO, National Professional Practice Exam. Checked on October 28, 2026.

No engineering degree?

PEO’s limited licence (LEL, or LET for certified engineering technologists) is for people with at least eight years of relevant experience, six of them in a defined scope, and it also requires the NPPE. See technologists and the NPPE.

Alberta: APEGA

P.Eng requirements in Alberta
RequirementWhat APEGA asks for
DegreeGraduation from a CEAB accredited program, or a related program the Board of Examiners considers equivalent.
Experience48 months of engineering work experience and 22 key competencies. Since July 18, 2026, every applicant uses the revised CBA, which integrates eight Canadian work environment equivalencies into the 22 competencies. With fewer than 48 months, you apply as a member in training.
NPPERegistration opens only after you have submitted your application. $250 plus GST per exam, four attempts in total.
OtherGood character and reputation, competency in written and spoken English, proof of Canadian citizenship or permanent resident status, and proof of identity.
Application fee$500 for new applicants, $325 for current members in training, $250 if you are already a P.Eng in another Canadian province. Non-refundable.

Sources: APEGA, professional member, APEGA, NPPE. Checked on October 28, 2026; APEGA notes its fees can change.

Where the NPPE fits, and how to prepare

The NPPE is the same exam in both provinces: 110 multiple choice questions in 2.5 hours on professionalism, ethics, professional practice, law and the regulation of the professions, with a scaled pass score of 65. In Ontario you must pass it before you submit your application; in Alberta it comes after you apply. Either way it runs five times a year, so check the NPPE exam dates and registration deadlines early. Already licensed as a PE in the United States? See P.Eng vs PE.

PassNPPE is built for this exam: a study guide for every blueprint sub-topic, practice questions with every option explained, and full timed mock exams. Start with the free sample questions or how to pass the NPPE.

Free accountNo card needed

60 practice questions and a timed mini exam, free

  • 60 questions weighted like the real exam
  • An 82 minute mini exam, scored by section
  • Section I of the study guide in full
  • Basic: over 1,400 questions and full mock exams with no limit

Frequently asked questions

When can I write the NPPE in Ontario?
As soon as you are ready, even right after graduation. PEO says you must complete the NPPE before you submit your application, and you register for it through PEO’s application portal after starting an application and confirming your academic eligibility.See the NPPE with PEO.
When can I write the NPPE in Alberta?
After you apply. APEGA opens NPPE registration only once you have submitted your application for professional membership. APEGA charges $250 plus GST and allows four attempts.See the NPPE with APEGA.
How many years of experience do I need for a P.Eng?
In Ontario, you must pass the competency based assessment and have at least two years of eligible experience counted from the date your degree is conferred; PEO says applicants need three to four years on average. In Alberta, APEGA asks for 48 months of engineering work experience and 22 competencies.
Do I need Canadian experience?
Not in Ontario: PEO states that it does not require Canadian experience. In Alberta, since July 18, 2026, APEGA’s revised competency based assessment integrates eight Canadian work environment equivalencies into its 22 competencies.
Is the NPPE the same in Ontario and Alberta?
Yes. It is one national exam, 110 multiple choice questions in 2.5 hours, used by every engineering regulator outside Quebec. Only the registration rules, fees and attempt limits differ.See what the NPPE is.